 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (7)
- (1)
- (1)
- (1)
- (42)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Film solar cell edge laser cleaning machine
|
| Supply Ability: |
2000pieces |
| Related proudcts |
dust remove, |
| Specifications |
TH |
| Price Term: |
FOB |
| Port of loading: |
Shanghai |
| Minimum Order |
1 |
| Unit Price: |
|
|
Feature
1.The device can move the platform longitudinally and the optical box horizontally according to the need, so that the laser head can be scanned quickly under the designated area the battery chip, and the film layer of the designated area of the battery chip can be removed by the vibrating mirror.
2.High degree of automation (optional automatic loading and unloading, high efficiency of the whole machine processing efficiency increased by 300).
3.Following type dust removal, the dust collecting mouth follows the laser spot movement to ensure the dust collection at the same time.
4.Laser scanning can only remove the film, and it cannot damage the film.
The film that has not been removed by laser is not damaged and polluted by dust.
INo dust on the surface of the finished workpiece, particle residue.
5.After the laser over the workpiece through the insulation performance test.
Insulation resistance value>1000M after lamination.
6.Dust removal effect: after edge cleaning, 400 times microscope is used to check the clear edge area without more than 1 micron pellet.
Technical Parameter
Laser wavelength: 1064nm
Laser pulse width(typical value): 70ns, 10KH,1064nm
Laser pulse stability: £¼3%£¨RMS£©up to 15KHz
Output mode: single light path output of single-machine single-laser
Z axis light point focal plane adjustment: floating fine-tuning
Average processing speed: 200-400mm/s
Average edge clearing efficiency: ¡Ü1 minutes/board(containing incoming and outgoing materials)
Linear degree of motion: ¡À10um/m
Working table flatness: 50um
Edge clearing accuracy: ¡À0.1mm
Spot diameter: 0.5-1mm
Spot morphology: square spot
Effective processing range: 635mm*400mm(customizable)
Resistance value: 1000M¦¸,1000VDC(pre-lamination)
Water chiller water supply: deionized water
|
| Company: |
Suzhou Tianhong Laser Co., Ltd
|
| Contact: |
Ms. Yulin Li |
| Address: |
No.66 Tonghe Road, Weiting, Industrial Park Zone |
| Postcode: |
215122 |
| Tel: |
86 62991330 |
| Fax: |
86 051262745987 |
| E-mail: |
|
|
|
Home
